Manually change switch modes: dimmer or on/off mode

Dial

  • Pull out the set button to engage the air gap (so switch is powered off).
  • Press and hold the Dial.
  • While pressing the Dial, push set button back in place. Continue pressing the Dial. The LED will turn blue and when the mode is changed it will beep (double beep for on/off mode, single beep for dimmer mode).

Paddle

  • Pull out the set button to engage the air gap (so switch is powered off).
  • For Dimming: Press and hold the top of the paddle.
  • For On/Off: Press and hold the bottom of the paddle.
  • While pressing the paddle, push set button back in place. Continue pressing the paddle. The LED will turn blue and when mode changed it will beep (double beep for on/off mode, single beep for dimmer mode).

Keypad

Set to dimmer mode:

  • Pull out the set button to engage the air gap (so switch is powered off).
  • Start from the top, press and hold the Keypad first and second keys.
  • While pressing these two keys, push set button back in place. Continue pressing these two keys. The first LED will turn blue and when mode changed keypad will beep once and set to dimmer mode.

Set to on/off mode:

  • Pull out the set button to engage the air gap (so switch is powered off).
  • Start from the top, press and hold the Keypad first and third keys.
  • While pressing these two keys, push set button back in place. Continue pressing these two keys. The first LED will turn blue and when mode changed keypad will double beep and set to on/off mode.