Manually adjust dimming behavior

Resume to last used on level

Set the switch to remember the last Brightness Level when operated locally:

  • Turn off the light.
  • Press set button once, switch will beep once.

Custom on level

Set the switch to remember the last Brightness Level when operated locally:

  • Adjust the light to the desired brightness level (e.g., 10%, 75%, 100%).
  • Tap set button once. It will beep and your custom on level will be programmed.

Adjusting fading speed

Fade speed refers to the speed at which the light turns on and off when operated locally:

  • Adjust brightness level: the lower the brightness, the slower the fade speed*
Brightness
Fade Speed
91%-100%Instant
78%-90%0.2 seconds
65%-77%0.3 seconds
52%-64%0.5 seconds
39%-51%2 seconds
26%-38%4.5 seconds
13%-25%6.5 seconds
1%-12%8.5 seconds
  • 2. Double tap set button. It will beep and a fade speed will be programmed.
    Note: wait four minutes before linking to another a device unless you are setting the fade speed for a lighting preset, in which case, complete the link to the controller within four minutes.

*You have access to an extended range of fade speeds when using with Nokia Smart Lighting Bridge.